Saturn 2007 Relay Owner's Manual page 15

Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
You can do this by either pulling on the nylon
strap, located on the rear right hand side
of the seat, or by lifting the recline lever,
located on the front right hand side of the
seatback.
3. Slide the seat all the way back in this position.
2. Fold the seatback
flat on the seat.
To return the seat to the original position, do the
following:
1. Align the seat so that the rear hooks on the
seat are over the rear floor pins. Push down
firmly on the rear of the seat so that the
rear hooks attach to the rear floor pins.
2. Try to raise the seat to check that it is locked
to the floor.
4. Release the rear set
of seat hooks from
the floor pins by
pulling the nylon
strap, located at the
base of the seat. Use
the strap to guide the
seat forward.
15