Headlamp High/Low-Beam Changer - Saturn 2004 Ion Owner's Manual

As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you signal
a turn, check the fuse, see Fuses and Circuit Breakers
on page 5-95 and for burned-out bulbs.
Turn Signal On Chime
If the turn signal is left on for about 1 mile (1.6 km),
a chime will sound to let you know you left the
turn signal on.

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high or high
beam to low, push the turn signal lever away from
you. Then release it.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
When the high beams
are on, this light on the
instrument panel cluster
will also be on.
3-9