Headlamp High/Low-Beam Changer - Saturn 2004 L-Series Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high or high
beam to low, pull the turn signal lever all the way
towards you. Then release it.
Flash-to-Pass
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To use it, pull the turn signal/multifunction lever toward
you until the high-beam headlamps come on, then
release the lever to turn them off.
Headlamps
The exterior lamp control is located in the middle of the
turn signal/multifunction lever.
O
(Exterior Lamp Control): Turn the control with this
symbol on it to operate the exterior lamps.
When the high beams are
on, this light on the
instrument panel cluster
will also be on.
The exterior lamp control has the following four
positions:
AUTO (Automatic): Turn the control to this position to
put the headlamps in automatic mode. AUTO mode
will turn the exterior lamps on and off depending upon
how much light is available outside of the vehicle.
; (Parking Lamps): Turn the control to this position
to turn on the parking lamps together with the
following:
•
Sidemarker Lamps
•
Taillamps
•
License Plate Lamps
•
Instrument Panel Lights
53 (Headlamps): Turning the control to this
position turns on the headlamps, together with the
previously listed lamps and lights.
Lamps On Reminder
If you open the driver's door with the ignition off and the
lamps on, you will hear a warning chime.
3-7