Table of Contents
Advertisement
DAILY timer
After programming, the system starts and stops each day at the preset times. Two pairs of time settings
can be programmed.
~
(Example: 8:00
10:00, and 18:00
1
Press
to select the DAILY timer.
2
Make the ON and OFF time settings.
Program example: 8:00
Settings
ON time setting
When the timer
used, save the setting
as
1
OFF time setting
ON time setting
When the timer
used, save the setting
as
2
OFF time setting
3
Press
. The DAILY timer is now programmed.
Note
If the following appears on the display, the timer must be reprogrammed.
The 24-hour timer display
is blinking.
This means that Timers
programmed for the same time settings.
New time settings must be made.
14
~
23:00)
~
~
10:00, and 18:00
Procedure
Press
is not
1
is not
2
and
are
DAILY timer indication appears.
lights up.
Take the steps from
23:00
Press
The 24-hour timer display
is blinking.
This means that the timer has not been
programmed yet.
to
.
to make the
timer setting.
Hide quick links:
Advertisement
Table of Contents
