SATO GT424 Operator's Manual page 57

3 . 9 . 1 2 E n a b l i n g / D i s a b l i n g E x t e r n a l S i g n a l O u t p u t
Set this option to enable or disable the printer's external signal
communication port. If the port is enabled, you can send and
receive data using an appropriate device plugged into the EXT port.
Press the / buttons to select the ENABLE or DISABLE option.
The default value is DISABLE.
Press the ENTER button to confirm the setting and proceed to the
next screen.
3 . 9 . 1 3 S e l e c t i n g t h e T y p e o f E x t e r n a l S i g n a l O u t p u t
If the External Signal Output option is enabled, you will be brought
to this screen to select the type of PREND output signal.
Press the /
or TYPE4. The default value is TYPE4. For more details, refer to
the SBPL Programming Guide found in the accessory CD-ROM.
Press the ENTER button to confirm the setting and proceed to the
next screen.
3 . 9 . 1 4 S e l e c t i n g R e p r i n t v i a E x t e r n a l S i g n a l O u t p u t
If the External Signal Output option is enabled, you will be brought
to this screen to choose whether the Reprint function can be
activated via the external signal port.
Press the / buttons to select ENABLE or DISABLE. The
default setting is DISABLE.
Press the ENTER button to confirm the setting and proceed to the
next screen.
GT Series Operator's Manual
buttons to select TYPE1, TYPE2, TYPE3
Section 3: Configuration and Operation
Page 3-21