SATO GT424 Operator's Manual page 45

3 . 5 . 5 S e t t i n g Z e r o S l a s h C h a n g e o v e r
You can use this setting to determine whether zeroes are printed
with a slash across them or not. The zero slash (excluding Kanji)
can be set to either "0" or "Ø".
Use the / buttons to select YES or NO. 'YES' means zeroes
will be printed with a diagonal slash across them. 'NO' means
otherwise. The default value is 'NO'.
Press ENTER to select the desired option and proceed to the next
setting.
3 . 5 . 6 S e t t i n g J I S K a n j i C o d e C h a n g e o v e r *
* option is only valid for printing in Japanese
The printer can be set to use either JIS code or Shift JIS code.
Use the / buttons to select JIS or SJIS. The default value is
JIS code.
Press ENTER to confirm your selection and proceed to the next
setting.
3 . 5 . 7 S e t t i n g K a n j i F o n t S t y l e *
* option is only valid for printing in Japanese
The Kanji font style can be set to either "GOTHIC" or "MINCHO".
Use the / buttons to select GOTHIC or MINCHO. The default
value is GOTHIC.
Press ENTER to confirm your selection and proceed to the next
setting.
GT Series Operator's Manual
Section 3: Configuration and Operation
Page 3-9