SATO GT424 Operator's Manual page 48

Section 3: Configuration and Operation
3 . 6 . 3 A s s i g n i n g A n I n t e r f a c e C a r d F o r P r i n t i n g
This setting lets you select which installed interface card is to be
used for bi-directional communication/printing. The other card is
then presumed to be a mini LAN card, which is intended for
transmitting printer status information to a LAN.
The card selected by default for bidirectional communication is the
one that is not a mini LAN card. Card2 is assumed to be a mini LAN card.
Press the / buttons to select either CARD1 or CARD2.
Press the ENTER button to confirm a setting and proceed to the next screen.
3 . 6 . 4 S e l e c t i n g T h e D a t a I n p u t P o r t
Use this setting to define which installed interface card is to be used
as the port for receiving print data. The default value is CARD1
(which is the non mini LAN card).
Press the / buttons to select either CARD1 or CARD2.
Press the ENTER button to confirm a setting and proceed to the
next screen.
Note:
If you set the data input port to be CARD2 but print data is received at CARD1, printing will not
occur. The reverse also holds true.
3 . 6 . 5 E n a b l i n g o r D i s a b l i n g T h e S t a t u s R e t u r n P o r t
Use this setting to enable or disable the status return port.
The interface card which is not being used as the data input port
(see Section 3.6.4 above) is the status return port. The default
value is ENABLE.
Press the / buttons to select either ENABLE or DISABLE.
Press the ENTER button to confirm a setting and return to the main screen of the Interface Mode.
Page 3-12 GT Series Operator's Manual