Attaching/Removing The 1.4K Teleconverter - Panasonic Lumix H-ES200 Owner's Manual

• When carrying, the lens hood can
be temporarily attached in the
reverse direction.
• Do not carry the lens by holding
only the lens hood.
Attaching/Removing the
1.4k Teleconverter
• The teleconverter can be used in combination with
this lens (H-ES200). (As of November 2017)
• For the most up-to-date information on compatible lenses
other than this lens, check the Panasonic website.
• Do not attach any parts other than a compatible lens.
Doing so may damage the lens or teleconverter or
adversely affect its performance.
• Before attaching or removing the teleconverter, verify
that the digital camera is turned off.
• Remove the lens cap and the lens rear cap.
∫
To attach the teleconverter
1
Align the fitting mark
on the teleconverter with
the lens fitting mark
the lens (1), and rotate the
teleconverter in the arrow
direction until a clicking
sound is heard. (2)
A
on
B


2
Align the lens fitting mark
on the teleconverter with
C
the lens fitting mark
the digital camera (3), and
rotate the lens in the arrow
direction until a clicking
sound is heard. (4)
• When attaching the lens to the digital camera, do not
press the lens release button
button on the teleconverter.
∫
To remove the teleconverter
1
While pressing and
holding the lens release
button on the digital
E
camera, rotate the lens
fitted with the
teleconverter in the arrow
direction until it stops and
remove it (1, 2).
2
While pressing and
holding the lens release
button on the
F
teleconverter, rotate the
teleconverter in the arrow
direction until it stops and
remove it (3, 4).
on
D
 
and the lens release
E
(ENG) DVQX1303



7