Sanyo PLC-XU305K Owner's Manual page 34

Computer Input
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press
the SELECT button. Move the highlight to the mode that you
want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the
SELECT button. Move the red arrow pointer to one of the
Modes 1 to 5 in which you want to store, and then press the
SELECT button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 70p, 1035i or 1080i is selected in the PC
System Menu (p.31).
• PC Adjust Menu cannot be selected when Computer (PC digital) is selected in the Input Menu (p.30).
34
Values of Total dots, Horizontal,
Vertical, Display area H and
Display area V.
Press MENU button
to close this dialog
box.
This mode has stored
parameters.
Vacant
Press SELECT button to
store adjusted data