Calling Up Submenus; Information Menu - Bosch Condens 7000 F Operating Instructions For Users

CC8313 control unit
Menu levels
If several menus or functions are available at one level:
▶ Tap the corresponding position (function) on the display with your
finger.
1 2 3 4
9 8
Fig. 13 Heating circuit overview (example)
[1] System > Control unit 01
[2] Domestic hot water
[3] Heating circuit 03
[4] Heating circuit 01
[5] Heating circuit 04
[6] Heating circuit 02
[7] Heating circuit 05
[8] Heating circuit 07
[9] Heating circuit 06
To select a different function within a menu level:
▶ Tap the right or left arrow on the display with your finger.
-or-
▶ Swipe to the left or right across the display with your finger.
50 °C
on/off
30 %
Fig. 14 Scrolling
-or-
▶ Swipe your finger across the display.
14
5 6 7
12:00
0010006525-001
12:00
0010006536-001
50 °C
on/off
30 %
Fig. 15 Wipe
Display of heating circuits
Designations are allocated to the heating circuits depending on the slot
of the heating circuit module. The heating circuits are numbered
according to the sequence of slots. This means that the heating circuits
at slot 1 are displayed as heating circuit 01 and 02. The heating circuits
at slot 2 are displayed as 03 and 04. If a different module is inserted at a
slot, these heating circuit numbers are omitted. If the heating circuit has
been given a name, this is displayed.
5.4.5

Calling up submenus

Observe technical documentation of the installed control unit.
5.4.6

Information menu

To display information about the installation or the system:
▶ Tap symbol.
▶ Tap the required area in the Info menu.
i
Fig. 16 Overview of Info menu
Depending on the area, the following information is e.g. displayed:
• Statuses of safety equipment
• Temperatures
• Operating modes
• Hours run
Condens 7000 F – 6720871579 (2018/07)
12:00
0010006537-001
12:00
0010009883-001