CC8313 control unit
5
CC8313 control unit
5.1
Control elements of the control unit and the user interface
10
9
8
Fig. 7
Control elements
[1]
Touch screen
[2]
Activation Code (registration code)
[3]
Reset button (e.g. high limit safety cut-out, SAFe)
[4]
Flue gas inspector key (for flue gas test)
[5]
Manual operation key
[6]
USB interface (e.g. for service purposes)
[7]
LED status display
[8]
Type plate
[9]
F1-, F2 circuit breaker
[10] Appliance on/off switch
10
1
6
5
4
3 2
7
5.2
Function buttons and system status
Function buttons
The function buttons enable
• Manual operation
• Flue gas test
• Reset (e.g. high limit safety cut-out, SAFe)
System status, function status, component status
The status of the system, the functions and system components is
displayed via the Function status display ( Fig. 9, [1], page 12), the
System components status display ( Fig. 9, [15], page 12) and the
LED status display ( Fig. 7, [7], page 10):
• Green = system in automatic mode
• Yellow = system in manual mode, Flue gas testFlue gas test,
Service displayService display or Blocking faultBlocking fault
SAFe
• Yellow flashing = Control unit couplingControl unit coupling
• Red = FaultFault
5.2.1
ResetReset key
When the key is pressed
the locking fault is unlocked and the
functions are reset (e.g. following triggering of the high limit safety
cut-out or resetting of the SAFe).
To unlock a function:
▶ Key
Hold down for 2 seconds.
Condens 7000 F – 6720871579 (2018/07)
0010005509-001