Rear Light; Direction Indicator Lights - Bulb Replacement - Triumph Bonneville Bobber 2018 Owner's Handbook Manual

To replace the headlight and/or position
light bulb:
• Disconnect the battery, negative
(black) lead first.
• Remove the headlight rim fixing.
• Detach the
assembly from the headlight bowl.
• While supporting the light unit,
disconnect the multipin electrical
connector from the headlight bulb
and carefully remove the position
light bulb from the light unit.
• Remove the rubber dust cover.
1
cjwl
1. Wire retainer
2. Headlight bulb
3. Position bulb location
• Unhook the headlight bulb's wire
retainer.
• The headlight bulb can now be
removed.
• Remove the position bulb from its
bulb holder if it needs replacing.
• Installation
removal.
• Tighten the headlight rim fixing
to 2 Nm.
headlight and
2
3
is the reversal

Rear Light

The LED rear light units are sealed,
maintenance free LED units. The rear
light assembly must be replaced in the
event of the failure of the rear light.
rim
Direction Indicator Lights -
Bulb Replacement
The direction indicator light units are
sealed, maintenance-free LED units.
of
Maintenance
115