Indicators And Projector Condition - Sanyo PJLINK PLC-WM4500 Owner's Manual

Appendix
Check the indicators for the projector condition.
The projector is operating normally .
POWER LAMP
green red
❖
❖
❖
❖
❖
• • • on
• • • on (red)
❖
❊
• • • on (blue)
• • • dim
❖ • • • dim (red)
7

Indicators and Projector Condition

Indicators
WARNING WARNING
P-MANAGEMENT
TEMP. FILTER
STAND-BY
blue
red orange
⁄
⁄
⁄
⁄
⁄
❊
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
❊ • • • blinking at the normal rate (blue
and dim red) (approx. 1 second
ON, 1 second OFF)
• • • off
⁄
• • • Differ according to conditions.
Projector Condition
LAMP
REPLACE
orange
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/
⁄
STAND-BY button to turn on the projector.
⁄
The projector is operating normally.
The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
⁄
turned on until cooling is completed and the POWER
indicator lights green.
The projection lamp is being cooled down in the Power
⁄
management mode.
The projector is in the Power management mode.
⁄ Press the ON/STAND-BY button to turn on the
projector.
• • • blinking fast
❊
• • • blinking fast
• • • blinking slow
(approx. 0.5 seconds ON, 0.5
seconds OFF)
(blue and dim red)
(approx. 0.5 seconds ON, 0.5
seconds OFF)
(approx. 2 seconds ON, 2
seconds OFF)