Manual Pc Adjustment - Sanyo PJLINK PLC-WM4500 Owner's Manual

Computer Input
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has
10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific
computer.
1
Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select PC adjust and then press the
Point u or the SELECT button.

Use the Point pq buttons to select the desired item and then
press the SELECT button to display the
adjustment dialog box. Use the Point t u buttons to adjust the
setting value.
Fine sync
Use the Point t u buttons to adjust the value, eliminating a flicker
from the image displayed (from 0 to 31).
Total dots
Use the Point t u buttons to adjust the number of total dots in one
horizontal period to match your PC image.
Position H
Use the Point t u buttons to adjust the horizontal picture position.
Position V
Use the Point t u buttons to adjust the vertical picture position.
Current mode
Press the SELECT button to show H-sync freq. and V-sync freq. of
the connected computer.
Clamp
Use the Point t u buttons to adjust the clamp level. When the
image has dark bars, try this adjustment.
Display area H
Use the Point t u buttons to adjust the horizontal area displayed
by this projector.
Display area V
Use the Point t u buttons to adjusts the vertical area displayed by
this projector.


Manual PC Adjustment

PC adjust Menu
Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
0
1366
0
0
0
1024
768