Table of Contents
Advertisement
FUNCTION
VOLUME +/–
CHANNEL +/–
STANDBY indicator
Notes:
• The display that appears when the unit is
operated will disappear after a few seconds
to 1 minute in order to preserve the LCD
screen.
• When you will not use it for some time,
such as when you are traveling, unplug the
AC adaptor from the outlet.
TV OPERATION
/ON
Rod
Antenna
PHONES
Preparation:
• Connect the antenna correctly.
When you are using a rod antenna, adjust it to where it gets
the best reception.
• Connect the unit to a AC outlet using the supplied AC
adaptor and power cord.
Basic Operation
1
1
To turn on the unit, press [
FUNCTION
• Every time you turn on the power, it will be in the TV
mode and the TV screen is displayed.
• When anything other than the TV screen is displayed,
2
switch the mode of operation by pressing [FUNCTION].
When turning off the power (Standby mode), the
STANDBY indicator comes on. When you turn the
power on, it turns off.
3
2
Adjust the volume level by pressing [VOLUME] +/ –.
3
Press the Direct Channel selection [0–9] to select the
channel.
• You can select channels in order using [CHANNEL]
+/–.
Listening with Headphones
Connect headphones (not supplied) to the PHONES jack on
the side of the unit.
• Please use mini-plug headphones.
• If you connect headphones, the speakers are muted.
Watching Videos
Press [FUNCTION] to select the External input mode.
Each time you press the button, the screen will change as
follows.
TV mode
mode...
If you select the External Input mode, you can see the external
source from the devices connected to the AUDIO/VIDEO IN
jacks on the side of the main unit.
-E45-
CH 006
12
VOLUME
/ON].
External Input mode
Channel
Volume indicator
DVD mode
TV
Advertisement
Table of Contents
