Dynamic Range Control - Sanyo DVD-L70 Instruction Manual

DYNAMIC RANGE CONTROL

This function sets the DRC (Volume) for a
DVD disc.
The settings will be retained in the memory
until they are changed, even if the power is
turned off or the disc is replaced.
Notes:
• This function works only during playback of
Dolby Digital recorded discs.
• This function does not work with sound
output from an optical terminal.
• DRC stands for Dynamic Range Control.
• If you feel the sound is distorted when you
playback, switch the mode setting to "Std".
Dynamic Range Control
When you playback discs recorded with Dolby Digital, this
function makes it easier to hear the sound from the connected
TV, even if the volume is reduced.
1 Press [SETUP] in the stop mode.
"Language" is selected.
2
Press [ ] to select "Sound".
Language Picture
3
Press [ ] to select "DRC", then press [ ] or [ENTER].
Language Picture
DRC
1, 6
4
4
Press [ ] or [ ] to select desired setting.
2
Language Picture
DRC
3
Std: Plays back with the sound recorded on the disc.
3, 5
TV: When connect to the TV and set this if you feel the
5
Press [ENTER].
6
Press [SETUP] to close the screen.
-E35-
Sound Parental Other
/Enter/Setup
Sound Parental Other
TV
/Enter/Setup
Sound Parental Other
Std Std
TV
/Enter/Setup
sound is too low.
DVD