Content Management System; Initial Setup; Login - Planar Simplicity Series User Manual

23. Content Management System

The Planar Simplicity Series 4K display has an integrated Content Management System (CMS),
enabling the user to download software directly onto their PC and use other assets such as
photos or videos, to create digital signage content and then schedule and deploy to the display.
Please see below for more information.
System Requirements: Windows 7/8/10

23.1 Initial Setup

1. Download the CMS software from the Planar website under the Support Drivers and
Software section
Note: CMS must be used with a PC and accompanying Windows software.
2. Launch CMS and use the default administrator credentials to login for the first time. See
Login below.
3. Change the account name and password by going to Account Info in the Account
dropdown (see page
4. Go to the Settings section of the Android menu on your display
down and select Signage Display, then select CMS.
5. Enter the following credentials
a. Version:
b. Server:
c. Account:
d. PIN Code:
6. After CMS is setup in the Android menu
to configure content and scheduling for deployment on the display. See details below.

23.2 Login

To Login, The default administrator credentials are as follows:

Account: admin

Password: admin
The administrator can create new accounts, which will use the following default password:
Ab123456
Simplicity Series 4K Displays User Guide
020-1343-00A
(see page 92).
74).
Ver. 3
IP address of the computer controlling the CMS software
Enter Account Info name set during step 3.
Code is located in the top right corner of the purple box in the
CMS Device List Menu
(see also page
Operating the Display
(see page
(see page 79).
55), return to the CMS software
51). Scroll
Page | 73