Displaying The Information Banner - Sanyo LCD-37XR9SDA Instruction Manual

Basic Operations
Selecting the Input Signal Source
1
Press SOURCE button.
2 Press 6 or 5 to select the input source. Options include:
! DTV — Watch the DTV signal.
! ATV — Watch the ATV signal.
! AV — Watch the signal from the AV input terminals.
! Component 1 — Watch the signal from the COMPONENT 1 input terminals.
! Component 2 — Watch the signal from the COMPONENT 2 input terminals.
! D-SUB — Watch the signal from the D-SUB input jack.
! HDMI 1 — Watch the signal from the HDMI 1 input jack.
! HDMI 2 — Watch the signal from the HDMI 2 input jack.
! HDMI 3 — Watch the signal from the HDMI 3 input jack.
3
Press 3
,4 or OK to confirm the selection.

Displaying the Information Banner

Press the INFO button to display the information banner. The information banner displays current status information such as
the channel number and signal source.
Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an
example banner in DTV mode.
2 ABC TV Sydney
DTV
SD MPEG
British Isles: A Natural History
Fri, Feb 27 2008
11:05
English
Subtitle Teletext
Reserved for future use
Alan Titchmarsh continues his epic journey around the
British Isles and discovers why they are so diverse.
Note
=
The above OSD is only served as an example, and it is in DTV mode.
=
Information banner content varies, depending on the broadcaster and your settings.
(Continued)
11:08
12:00
Next
576i
In DTV mode, the information banner may contain:
Channel number and name.
!
Current time.
!
Current program name, start and end play times.
!
Next program name and start and end play times.
!
TV or Radio.
!
Audio mode, audio track.
!
Signal strength for current channel.
!
Signal resolution.
!
Subtitle, teletext.
!
15
Input Source
DTV
ATV
AV
Component 1
Component 2
D-SUB
HDMI 1
HDMI 2
HDMI 3
Move Select