Uninstalling Stand Base - Sanyo LCD-32CA9S Owner's Manual

APPENDIX
Through in uninstalling work, handling with more than two people is recommended.
When holding (moving or lifting) the LCD Display, hold the display's body. Do not handle the LCD TV by
holding the attached accessory parts (speakers), otherwise it may result in damage.
Before uninstalling, provide a desk (or a part of it) which is strong enough to support the weight of the
LCD TV and this stand. The desk must be larger than the LCD Display screen size. The desk's surface
must be flat and maintained with soft material (such as a blanket) for protecting the screen surface.
Before putting the LCD Display on the desk, make sure there is no object on it. Leaving any object
under the screen may cause damage on the screen.
The LCD TV with this stand should be uninstalled on flat and level place. Do not place on such as
an non flat, unlevel or unstable cart or stand. The display may fall, causing not only serious damage to
the products but serious injury to a person.
For correct installing, mounting and uninstalling LCD TV Stand, it is strongly recommended to use a trained,
authorized dealer. Failure to follow correct procedures could result in damage to the equipment or injury to
the installer.

Uninstalling Stand Base

Place the LCD TV screen facing down on a
1
flat surface place where maintained with soft
materials (such as a blanket) for protecting the
display screen.
2 Release screw in 6 holes with screw driver.
40
Uninstalling Stand Base
CAUTION IN UNINSTALLING STAND BASE
SAFETY NOTE
Note: For model LCD-42CA9S, release screw
in 10 holes with screw driver.
Pull the stand base out from the cabinet after
3
all screws already removed.