ENGINE REMOVAL
1. Drain the coolant and transmission oil.
2.
Remove the exhaust pipe, footrest
assembly and coolant reservoir tank.
3. Remove the side cover and coolant hoses.
4. Remove the Y.E.I.S. chamber and spark
plug lead.
5. Remove the cylinder head holding
brackets and coolant hose.
6. Disconnect the clutch cable.
3-26
7.
Disconnect fuel pump suction hose and
C.D.I. leads.
8. Remove the rear brake tank, change
pedal, and drive chain cover.
9. Remove the nut, lock washer, and drive
sprocket.
10. Remove the front and center lower moun-
ting bolt. Remove pivot shaft.
1.
Front mounting bolt
3.
Pivot shaft
2. Center lower mounting bolt