Table of Contents
Advertisement
GB
Input
To switch input source from AV1, RGB, AV2, AV3, PC, DVI or
Network mode.
Wide
To select the screen mode Full, Full All, Zoom 16:9, Title in
16:9,
Zoom 14:9, Title in 14:9, Normal or Natural wide,.
Refer to page 11.
Menu
To enter and exit the main menu, and sub menu.
Level Up/Down
To adjust the sound volume level or enter sub menus
F/OK
To confirm the initial setting in the menu.
Picture mode selector
Press the -> . <- button repeatedly to select the following
picture mode.
Personal-Personal preference mode.
Standard-Normal viewing mode.
Dynamic-Suitable for brightly lit rooms.
Soft- Low contrast setting
Eco-Suitable for dimly lit rooms and gives a cinema-like
effect.
Freeze
To switch picture still on or off.
Green
Press this button for more than 5 seconds, installation
mode will appear.
Remote control battery installation
Install two "AA" 1.5 volt batteries so that the "+" and "-" marks on the
batteries match the "+" and "-" marks inside the unit into the remote
control handset.
6
REMOTE CONTROL
REMOTE CONTROL
FOR EU USERS
The symbol mark and recycling systems described
below apply to EU countries and do not apply to
countries in other areas of the world.
Your SANYO product is designed and manufactured
with high quality materials and components which
can be recycled and/or reused.
The symbol mark means that electrical and electronic
equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household waste.
In the European Union there are separate collection systems
for used electrical and electronic equipment, batteries and
accumulators.
Please, dispose of them correctly at your local community
waste collection/recycling centre.
Please, help us to conserve the environment we live in!
Standby
To switch the monitor on and off. Also see page 7.
Recall
To display input selection information and the Time set.
You can also select colour systems in AV1 / AV3 mode as
follows: AUTO-> PAL -> SECAM -> NTSC -> NTSC4.43 ->
PAL M ->PAL N.
It can also be automatically adjusted in PC mode by pressing
this button for twice .
Back
Used to return to the previous menu.
Up and Down
To select the next or previous item.
Sound Mute
To mute the sound from the speakers.
The sound changes as follows : Normal volume <-> Mute
Bass Expander
To get an emphasised bass sound ON or OFF.
TXT/TV
To select Teletext mode.
Main/Sub Picture Swap
To swap Main and Sub picture.
ON/OFF
To switch OFF ->PIP(1) ->PIP(2) ->POP mode in turn.
Refer to page 12.
GB
Advertisement
Table of Contents
