Advertisement
SPECIFICATIONS:
Modem Specifications:
Operating Modes:
Wireless-300N Access Point
Wireless-300N Ethernet Bridge
Wireless-300N Universal Repeater
Wireless-300N Point to Point Access Point
Wireless-300N Point to Multipoint Access Point
Wireless-300N WDS Repeater
Network Specifications:
IEEE 802.11b/g/n
10dBi Built-In MiMO Directional Antenna
800mW Max 2.4GHz Wireless Transmission
Power
Supports WEP, WPA, WPA2 Wi-Fi Security
Network Management
Setup Utility (Browser Based)
Web Based Management Interface
Hardware Specifications:
Ports
Two 10/100 Mbps Ethernet Ports (PoE Pass
Through)
Power
Power Over Ethernet Adapter (POE)
Dimension / Weight
HPOW10D 6.5 (H) X 3.75 (L) X 2 (W) inches /
0.77lbs
Temperature
Operating: -4~140˚F , Storage: -40~176˚F
Humidity
Operating: 100% (Non-Condensing)
Storage: 100% (Non-Condensing)
System Requirements
Windows XP + or Mac OS X +
Internet web browser (Internet Explorer 4.0
or better, Safari, Mozilla, etc.)
Ethernet Cable to connect device to PoE
(length will vary depending on installation
environment)
A home or business network
High Power Outdoor WiFi
Directional Access Point / Bridge
HAWKING TECHNOLOGIES, INC.
SALES: (888) 662-8828
E-MAIL: sales@hawkingtech.com
POWER ON & CONNECT!
It's easy to install, it's easy to use! Everyone can do it.
STEP 1:
STEP 2:
STEP 3:
MOUNTING OPTIONS
The HPOW10D is complete with both Pole and Mounting Hardware.
For Wall Mounting, locate the included
bracket inside the packaging. Use the
included hardware to mount the bracket to
the wall. Once your bracket is secure, Click
the HPOW10D into place via the rear pole
mount extension.
IR V I NE, C A 92 61 8
FAX: (949) 206-9072
TECHNICAL SUPPORT: techsupport@hawkingtech.com
Power on the Access Point
Use the included Power over
Ethernet Injector to connect
the HPOW10D to your
network and a power source.
Configure the Access Point
Configuration can be
completed from any device
with a web browser. Simply
log into the setup page and
select your settings.
Mount the Access Point
Find a safe location to mount
the High Power Outdoor WiFi
Directional Access
Point/Bridge. For the best
point to point coverage, use
two HPOW10Ds facing each
other.
HPOW10D
MODEL:
Network
Data/Power
PoE
Power
Power over Ethernet (PoE) Adapter Included
For Pole Mounting, use the
included hardware and thread the
mounting tie straps through the
rear HPOW10D extension and
around your pole. Thread the end
through the lock head and secure
at your preferred height.
Advertisement
