Iso Sensitivity Setting - Sanyo VPC-MZ3 Instruction Manual

ISO SENSITIVITY SETTING

With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be fixed at the
equivalent of 100, 200, or 400.
1
Display a Shooting Setting Screen
(see page 39).
2
Select an ISO sensitivity setting
from the ISO sensitivity menu.
Ä: Sets the ISO sensitivity
automatically (equivalent to
ISO100 to 200).
: Sets the sensitivity to ISO100
equivalent.
: Sets the sensitivity to ISO200
equivalent.
: Sets the sensitivity to ISO400
equivalent.
3
Press the SET button.
œ This completes the ISO sensitivity setting.
HINT
œ By setting a higher ISO sensitivity, you can set higher shutter speeds and
capture images in darker locations, but noise in the captured images may
increase.
œ The Vertical Pixel Mixing (VP mix) is active, producing bright images with
little noise, in the following cases:
When shooting a video clip: All settings
When shooting sequential shots: At resolution
109
English
B
ISO
AUTO
with a sequential
shot interval setting of
14
or