Rear Panel - Sanyo DS35510 Owner's Manual

REAR PANEL

Audio /Video Input Jacks (AV2)
Connect other external video equip-
ment here (see page 13).
AUDIO VIDEO INPUT AUDIO VIDEO INPUT
AUDIO AUDIO
OUTPUT OUTPUT
AV2 AV2 AV1 AV1
VIDEO VIDEO
(MON0)
L
L L
(MON0)
AUDIO AUDIO
R
R R
Audio Output Jacks (Fixed/Variable)
Connect external audio
equipment here (see page 13).
MULTIMEDIA REMOTE CONTROL
Operates your TV, VCR, DVD, Cable Converter Box, DVD, and Satellite Receiver. Simply
program it according to the directions on pages 7~9. Then press the proper function key
(VCR, TV, DVD, or AUX) to set the remote control to operate each product. The AUX mode
can be programmed to operate a Satellite Receiver, VCR, or Cable Box. Also, this remote
offers large Channel, Volume, Power, and Light keys that glow-in-the-dark. It has Function
keys that light and a keypad that lights when the Light key or other related keys are pressed.
INSTALLING BATTERIES (2 AA not included)
1. Remove the battery cover by pressing the tab and tilting
the cover upward. Insert batteries. Make sure you match
+
/ signs on the batteries with marks inside the
remote control.
2. Replace battery cover. The remote control is ready!
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove batteries from the remote control if it will not
be used for a month or more. Weak batteries may leak,
causing damage to the remote control.
Audio/Video Input Jacks (AV1)
Connect external video equipment
here (see page 13).
UHF/VHF/CATV
75Ω
S-VIDEO S-VIDEO
INPUT INPUT
AV1 AV1
AV2 AV2
S-Video (Super-Video) AV2 Terminal
To enhance video detail use the
S-Video AV2 jack instead of the AV2
Video jack, if available on your external
video equipment. (S-Video AV2 connec-
tion will override a Video 2 connection.)
Cable / Antenna Input
Terminal (75 ohms)
S-Video (Super-Video) AV1 Terminal
To enhance video detail use the S-Video
AV1 jack instead of the AV1 Video jack,
if available on your external video equip-
ment. (S-Video AV1 connection will
override a Video 1 connection.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled
or disposed of properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste Authority.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
See page 13 before
connecting external
audio/video
equipment.
Cables are not
supplied for connect-
ing your external
equipment.
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
Be sure batteries are
installed correctly.
Point the remote
control toward the
equipment you want to
operate. Objects
between the remote
control and the equip-
ment may cause
misoperation of the
remote control
function.
Need help?
Visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
5