Using The Rear A/ V Input Jacks - Sanyo DS20424 Owner's Manual

Using the Rear Audio/ Video Input Jacks
QuickTips
Make sure all cable
I
connectors are fully
seated on jacks.
Always match A/V
I
cables according to
the colors; red for
right audio, white for
left audio and yellow
for video.
A solid Blue screen
I
with the word
VIDEO2 displayed,
means that the Video
mode is selected, but
no signal is being
detected at the
Video jacks. Check
connections, turn on
external equipment.
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
Remote Control
POWER
INPUT RESET
MENU RECALL
CH
ƒ
„
Press
INPUT key after
connecting cables to
access the A/V inputs.
There is NO need to
tune to a blank
channel.
8
Connect a VCR or DVD Player to AV Input Rear Jacks
CONNECTING A VCR OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
‚
Connect VCR, DVD Player, or other equipment's Audio Video Out to the TV Audio Video
Input.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
x
Optional
Connect DVD Player or other equipment's S-Video Out to the TV S-Video In Jack.
Using the S-Video jack overrides the Video (AV1) jack.
ƒ
Press POWER to turn on the TV. Turn on external equipment also.
„
To access Audio/Video inputs, press the INPUT key to select VIDEO2.
Notes: Audio/Video Input (AV2) and Component inputs share the same audio (R/L) input
jacks.
Connect equipment to the component inputs or AV2 inputs, but not both sets at
the same time.
Back View of VCR
IN
IN
VHF/UHF
R-AUDIO-L VIDEO
RF
CHANNEL
3 4
OUT
OUT
R-AUDIO-L VIDEO
‚
‚
What you will need for connections:
‚
AV Cable – 1
O C
PTIONAL ONNECTION
x
S-Video Cable – 1
x
Audio Cable – 1
FROM ANT.
TO TV
Rear TV AV Input Jacks
UHF/VHF/CATV
AUDIO VIDEO
COMPONENT
2 INPUT 2
VIDEO
Y
P L
B
P
R
R
S-VIDEO
x
DVD Player
VIDEO OUT
AUDIO OUT
L R
COAXIAL
DIGITAL OUT S-VIDEO OUT
x x
75Ω
x
COMPONENT VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
Y P P
/C /C
B B R R