Montigo R Series Installation & Maintenance Manual page 30

STEP 13: Place log A in line with the burner, with the one straight
end on log C.
C
STEP 14: In front of the Left log from set LGS57, place log E
diagonally in front of the burner.
STEP 15: Place log F bridged between log E and the left log from set
LGS57. This log will go overtop of the burner.
STEP 16: To the left side of the burner port, place log 1 with the
curved end close to touching the back panel of the fireplace.
30
A
Figure 13.q
E
Figure 13.r
F
E
Figure 13.s
A
Figure 13.t
STEP 17: Place log D resting on the curve of log A to the left of the
burner.
D
STEP 18: Place log C parallel to the burner in between log A and E.
A
STEP 19: Place the final log 6 resting on the end of log 4 to the left of
the burner, as seen in figure 13w.
F
Installation
A
Figure 13.u
C
Figure 13.v
Figure 13.w
XG0225 - 170223
E