Table of Contents
Advertisement
Optional Log Set - R520
The Fireplace has the option of installing a drift wood log set. Once the base media of fireglass, firestones, or speckled stones has been placed
the log set can be installed. Ensure logs are securely placed and will not tip or fall.
Log Kit Installation
Log kits used to create sequence shown: 2 LGS58, 1 LGS57
A
B
Figure 12. LGS57
STEP 1: Place logs A and B from set LGS57 evenly spaced apart
behind the burner.
A
3
1
2
Figure 12.c LGS58
STEP 2: Place log 2 leaning against log B at the right side of the tray.
26
LGS57
B
Figure 12.b
LGS58
4
5
Figure 12.d
STEP 3: Place the first log #3 in front of the burner against the right
side of the tray.
STEP 4: Place log #6 leaning against log #3.
STEP 5: Align log #3 against log B, crossing from the front section of
the fireplace to the rear tray as shown.
STEP 6: Place log #1 along the inner side of the fireplace as shown,
touching log #3.
6
STEP 7: Place the first log #2 between logs A and B behind the
burner port.
Installation
3
Figure 12.e
6
Figure 12.f
3
Figure 12.g
1
Figure 12.h
2
Figure 12.i
3
3
XG0225 - 170223
Advertisement
Table of Contents
