Subaru Eyesight Owner's Manual page 80

Turning off Lane Departure Warning
Press and hold the Lane Departure Warning OFF switch for approximately 2 seconds or
longer to turn off the Lane Departure Warning. When 1 short beep sound emits, this function
is turned off and the Lane Departure Warning OFF indicator light on the instrument panel
will illuminate.
To turn the function back on, press and hold the Lane Departure Warning OFF switch again
for approximately 2 seconds or longer. When the function is turned on, the Lane Departure
Warning OFF indicator light turns off.
• When the Lane Departure Warning is turned off, the Lane Sway Warning is
also turned off.
• The ON/OFF status of the Lane Departure Warning is restored when you
restart the engine.
■ Lane Departure Warning OFF indicator light
This indicator illuminates when the ignition
switch is turned to the ON position, and then
approximately 7 seconds after the engine
starts, it turns off or remains illuminated
depending on the current status (ON or OFF).
It turns on when the Lane Departure Warning
is turned off.
It also illuminates under the following condi-
tions.
• When the EyeSight system has a malfunc-
tion
⇒
Refer to page 100.
• When the EyeSight system has stopped temporarily
⇒
Refer to page 102.
NOTE
Lane Departure Warning
S02388
S02409
79