Zte MF920VS User Manual page 20


TCP NAT Timer: Set TCP NAT time.

UDP NAT Timer: Set UDP NAT time.

802.11 Mode: Select an 802.11 mode from the drop-down list.

Frequency Bandwidth: Select a frequency bandwidth from the drop-down list.

Wi-Fi Channel: Select a Wi-Fi channel from the drop-down list.
2. Click Save Changes to save your settings.
WPS Settings
You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN Code) or PBC (push-button) mode on this
page. If your client device supports WPS, there's no need to enter password manually when WPS is
available.
●
SSID: Select the wireless network name that you want to connect to.
●
PIN: Enter the PIN that is generated by wireless access client.
●
Push Button Connection：To set up a Push Button Connection:
1. Select the PBC mode in the client WPS UI.
2. Select Push Button Connection mode in the WPS page of your hotspot and click Apply.
17