Table of Contents
Advertisement
●
Your hotspot supports Wi-Fi Protected Setup (WPS), which allows Wi-Fi connection settings to be
easily configured on any WPS-compliant device.
●
Enter Wi-Fi router's SSID and WPA keys to connect non-WPS-compliant Wi-Fi devices.
These settings should be performed when the device is connected the first time to another
Wi-Fi device. Thereafter, simply activate Wi-Fi (WLAN) to automatically connect your hotspot
the Wi-Fi (WLAN) device.
Activate Wi-Fi (WLAN) Function
Follow the instructions below to activate your hotspot's Wi-Fi function and connect to the Internet via an
available 4G LTE connection. Your device searches for and makes a connection automatically upon
powering up. Use the Web UI to select a network.
1. Turn on your ZTE Warp Connect and your Wi-Fi enabled device.
2. Open the Wi-Fi application or controls on the computer or Wi-Fi enabled device that you want to
connect to your ZTE Warp Connect and find the Wi-Fi name ' SprintHotspot_xxx'.
3. When prompted, enter your Wi-Fi password.
4. Your Wi-Fi enabled device is now connected to the Internet.
Note: You can view the label on the hotspot to get the default Wi-Fi SSID and password.
Web UI Overview
Use the device Web UI in a browser to check or change your hotspot settings from a device connected
either via Wi-Fi or by direct USB connection.
Launch the Web UI
1. Make sure the connection between your hotspot and the client is correct.
2. Launch the Internet browser and enter
The login page appears as follows. The following figure is only for your reference.
http://192.168.128.1
or
http://myhotspot
in the address bar.
11
Hide quick links:
Advertisement
Table of Contents
