Sanyo PRO-700 User Manual page 75

Note Talker Priority: The optional Team DC "Talker Priority" feature
lets you define a priority level (Low, Medium, or High) for each
member of a Team DC group. When a Team DC call is active,
members with a higher priority may interrupt a member with
a lower prioity while he or she is speaking. By default, all
members of a Team DC group are assigned a "Medium"
priority level.
5.
Click Save to save the Team DC group and distribute it to
the other group members.
Making a Team DC Call
1.
Press Contacts (right softkey).
– or –
Press
2.
Select a Team DC group and press
3.
Continue the Team DC call as any other Direct Connect
or Group Connect call.
4.
When you are finished, press
you end a Team DC call that you initiated, all other
participants are dropped from the call.)
Note Group Termination Options: By default, when the originator of
a Group Connect or Team DC call ends the call, all other
participants are disconnected as well. When available, you
will be able to select a setting in Settings > Direct Connect >
Group Call Opt. to allow Group Connect and Team DC calls you
initiate to remain active after you leave the call.
> History.
Section 2B: Making and Answering Calls
.
to end the call. (When
61