Sanyo PRO-700 User Manual page 65

Dialing Direct Connect numbers:
If the person you are calling has a separate number for
Direct Connect, make sure you dial any asterisks (*) in the
number. If you are saving the number in your Contacts,
choose DC Only for the phone type.
If the person you are calling has a single number for both
voice calls and for Direct Connect, use that 10-digit phone
number to make Direct Connect calls. You do not need to
add any asterisks (*) to the number. If you are saving this
number in your contacts, choose Mobile + DC for the
phone type.
Tip Users with a Nextel phone must always add asterisks (*)
between digits to dial Direct Connect numbers. If you use a
single number, make sure to tell your contacts with Nextel
phones to dial the 10-digit number using asterisks (*) in place
of hyphens (for example, 44*5555*111).
One way to easily ensure that your contact has your correct
number is to call them so that they can save your number
from their Call Log. Ask them for their contact information.
Remember you will need all digits of the number to make a
successful call. Also, if they have a Nextel phone or a separate
number for Direct Connect, you will need to enter asterisks (*)
between sets of numbers.
To tell if a number is a valid Direct Connect number:
Check the icon for the highlighted number.
If it has a
– or –
Select a contact and press
below the valid Direct Connect number.
and icon, it is a valid DC number.
Section 2B: Making and Answering Calls
. "DC capable"will appear
51