11.3. Checking and Repairing of
Main P.C.B. (Side A)
Step 1 Remove Top Cabinet.
Step 2 Remove Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove Main P.C.B..
Step 5 Remove SMPS Module and Voltage Selector P.C.B..
Step 6 Positioned the Main P.C.B., SMPS Module and the Volt-
age Selector P.C.B. on the insulated material.
Step 7 Attach 13P Cable at a connector (CON2) on the SMPS
Module.
Step 8 Attach 10P FFC at a connector (CN8251) on the main
P.C.B..
Step 9 Attach 24P FFC at a connector (FP8201) on the Main
P.C.B..
Step 10 Attach 17P FFC at a connector (CN2000) on the Main
P.C.B..
Step 11 Side A Main P.C.B. can be checked at diagram shown.
38