Dismantling the Cartridge
To open the cartridge:
1. Unwind any remaining label supply from the spool, then gently peel the end of the supply off of
the spool to separate.
2. Grip the spool just behind the black end cap (containing the smart cell).
3. With your thumb, apply pressure to the back of the black end cap to separate the cap from the
label supply cartridge core.
4. From the back side of the black end cap, press the blade of the screwdriver against the locking
tabs, applying outward pressure. This will release the smart cell.
5. Slide the cardboard core off of the plastic cartridge core.
BradyPrinter™ M611
Apply pressure
here.
Grip here.
Recycling the Label and Ribbon Cartridge
Setup
21