Manual Operation - Sanyo KHS1872 Instruction Manual

2. Manual Operation

OI-801-13EG
Operation with the Remote Control Unit (continued)
STEP 4
STEP 5
NOTE Check that the circuit breaker on the power panel is turned on.
If the automatic operation settings of the unit do not meet your needs, press the
setting buttons as described below and change the settings as desired.
STEP 1 Press the MODE selector button and select the desired mode.
STEP 2 To start the air conditioner, press the ON/OFF operation button.
STEP 3 Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
STEP 4 Set the FAN SPEED selector button to the setting you want.
STEP 5 Press the FLAP button and set the airflow direction as desired.
(Refer to "Adjusting the Airflow Direction" on page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
STEP 2
STEP 3
STEP 1
For heating operation
For dehumidifying operation
For cooling operation
For fan only operation
30 °C max.
16 °C min.
→
→
→
→
or 86 °F max.
60 °F min.
13