Pc Port - Alcatel-Lucent DeskPhone 8001 User Manual

8001/8001G DeskPhone

4.1.2 PC Port

Normally choose Bridge, if you choose Router, you need to enter the router IP address, net
mask.
"As Bridge" only when telnet is disables in Network > LAN Port > Advanced settings
"As bridge" or "As Router" when telnet is enabled in Network > LAN Port > Advanced settings
Bridge
Normally, you should choose the "bridge" feature, which means that the PC port and LAN port
will share the same network.
Router
The router feature is for the phone PC Port. You must enter the IP address (equivalent to a
gateway) and net mask. DHCP server in PC port is not implemented and Router DHCP, Start IP
address and End IP address should not be configured.
8AL90895USACed03
27/52