Table of Contents
Advertisement
3 Receiving
3
Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not function properly.
Option Package Contents
Description:
_
Quantity:
Tools Required for Installation
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
8
Table 2 Option Package Contents
Option Unit
Ground Wire
1
YASKAWA ELECTRIC SIEP C730600 59A V1000 Option Modbus TCP/IP Technical Manual
Warning Labels
4
) is required to install the option.
<1>
Installation Manual
MANUAL
1
1
Advertisement
Table of Contents
