Table of Contents
Advertisement
Cleaning the extraction grille and the
grease filter by hand.
Clean the extraction grille and the
grease filter with a soft nylon brush in
a mild solution of hot water and a
little washing-up liquid. Do not use
concentrated washing-up liquid.
Cleaning the extraction grille and the
grease filter in the dishwasher
Place the extraction grille upright in
the lower basket.
Place the grease filter with the filter
base at the top in lower basket. En-
sure the spray arm is not obstructed.
Use a proprietary household dish-
washer detergent.
Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the dishwasher deter-
gent used, cleaning the filter in a dish-
washer can cause permanent discol-
ouration to internal surfaces of the fil-
ter. However, this will not affect the
functioning of the filter in any way.
Internal surfaces of the cooker
hood
Whilst the grease filter is removed re-
move any grease deposits from all
accessible areas of the housing Do-
ing so will prevent a fire hazard.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Cleaning and care
Resetting the grease filter op-
erating hours counter
After cleaning the grease filter, the oper-
ating hours counter needs to be reset.
Touch the sensor for 3 seconds.
The sensor will go out.
Reactivating charcoal filter
The charcoal filter needs to be reactiv-
ated after 120 operating hours. The
sensor will light up.
Reactivate the charcoal filter as de-
scribed in the operating instructions
supplied with the recirculation box.
Resetting the charcoal filter
operating hours counter
Touch the sensor for 3 seconds.
The sensor will go out.
51
Hide quick links:
Advertisement
Table of Contents
