Hard Drive Blanks; Removing A Hard Drive Blank - Compaq ProLiant BL20p Maintenance And Service Manual

Hard Drive Blanks

To remove a hard drive blank:
1. Press the release buttons simultaneously (1).
2. Pull the blank out of the drive bay (2).
Figure 2-4: Removing a hard drive blank
To replace the hard drive blank, slide the blank into the bay until it locks into place.
Compaq ProLiant BL20p Server Blade Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: AvalancheX Part Number: 316080-001 Last Saved On: 12/18/02 11:31 AM
2
CAUTION: Always populate hard drive bays with either a hot-plug SCSI hard drive or hard
drive blank. Operating the server blade without a hot-plug SCSI hard drive or hard drive blank
results in improper airflow and improper cooling that can lead to thermal damage.
Removal and Replacement Procedures
1
1
2-7