Volvo V90 Quick Manual page 11

OVERVIEW, INTERIOR
Centre display is used to control many of the car's main functions,
e.g. media, navigation*, climate control, driver support systems and
in-car apps.
The driver display shows information on the drive, e.g. speed,
engine speed, navigation* and active driver support. It is possible to
choose what is to be shown in the driver display via the app menu,
which you open using the right-hand keypad on the steering wheel.
Settings can also be made via
the centre display's top view.
Head-up display* is a complement to the car's driver display and
projects information on the windscreen. It is activated via the centre
display's function view.
Start knob is used to start the car. Turn clockwise and release for
ignition position I. Hold the brake pedal depressed and turn the
start knob clockwise to start the car. For cars with manual gear
changing, the clutch pedal must also be depressed. For cars with
automatic gear changing, gear position P or N must be selected.
Switch off the car by turning the start knob clockwise.
Driving modes* are set using the control on the tunnel console.
The car always starts in Comfort mode. Press in the control and roll
it to select between
Comfort
centre display. Confirm by pressing the control. With
can adapt a driving mode according to your preferred driving cha-
racteristics. The individual driving mode is activated in
My Car Individual Drive Mode
Parking brake is activated when you pull the
at which point a symbol in the driver display illuminates. Release it
manually by pushing down on the control and depressing the brake
pedal at the same time. Using automatic braking when stationary
Settings My Car Displays
, , and in the
Eco Dynamic Individual
Individual
Settings
in the centre display's top view.
control upwards,
( ), the brake pedal can be released while maintaining braking
effect when the car has stopped, e.g. at traffic lights.
Remember that both Automatic braking when stationary and Auto-
matic application of the parking brake must be deactivated for an
automatic car wash. Automatic parking brake application is deacti-
vated in the centre display's top view under
Parking Brake and
in
Switch for passenger airbag* is located on the end face of the
instrument panel on the passenger side and can be accessed when
the door is open. Pull the switch out and turn to ON/OFF in order
to activate/deactivate the airbag function.
you
Settings
Suspension.
01
My Car