Time Setting - Sangean DDR-22 Operating Instructions Manual

Time setting

1. Turn on the radio by pressing standby button.
2. Press and release MODE button, display will flash 0:00.
3. Press and release Time Set button
will flash.
4. Press Tuning +/- button to select required hour then press Time Set
button again to confirm hour setting. Display minute digit will flash.
5. Press Tuning +/- button to select required minute then press
Time Set button again to finalize time setting.
Note:
The time can be auto adjusted by FM-RDS Auto clock set (CT)
but can't be auto adjusted by DAB signal.
7
8
DDR-22_381P101_GB.p65
, display hour digit
2006/3/23, ¤W¤È 09:49