Headphone Use; Flat/3D Sound Effect; Mute - Sangean DDR-22 Operating Instructions Manual

Headphone use

Headphone use with this radio should be fitted with a 3.5 mm
jack plug. Insert the headphones into the socket marked on
the rear side of the radio. When the headphones are plugged in,
the loudspeaker is automatically disconnected.
GB

Flat/3D sound effect

Switch the 3D switch (on the rear side of the radio) to get flat or
3D sound effect.

Mute

Press the MUTE button to mute the audio output.
Display will show MUTE.
Press the MUTE button again or press Volume Control buttons
will release mute.
30
31 2006/3/23, ¤W¤È 09:49
DDR-22_381P101_GB.p65