Fm/Mw Waveband Preset Station; Recalling Fm/Mw Waveband Preset Station - Sangean DDR-22 Operating Instructions Manual

FM/MW waveband preset station

1. Press the Standby button to switch on the radio, press Band
button to select FM or MW band and tune to a station as
previously described.
2. Same as DAB preset station described above.

Recalling FM/MW waveband preset station

1. Press the Standby button to switch on the radio, press Band button
to select FM or MW band.
2. Using Preset Up/Down button to cycle through required preset
station or simply press numeric button to recall preset station.
27
28
DDR-22_381P101_GB.p65
2006/3/23, ¤W¤È 09:49