Troubleshooting
Issue
Jack does not lift to full height.
Jack does not hold load.
Jack does not lower.
Jack feels "spongy" when lifting.
If you continue to have problems with your Jack, call Ranger Products at (805) 933-9970 or
visit www.bendpak.com/support/.
Parts Breakdown
Ranger Floor Jack
Action to Take
Check hydraulic fluid level; top off if low.
Check for leaks in the Hydraulic System; fix them if found. Add
additional hydraulic fluid if necessary.
Purge air from the Hydraulic System. Check hydraulic fluid
level; top off if low.
Purge air from the Hydraulic System.
8
P/N 5900393 — July 2017 — Rev. B