Low-Voltage Warning; Stop Function - Kohler K-5402A-0 Homeowner's Manual

M – Wand Move
Press this button to adjust wand position.
N – Dryer
Press this button once to activate dryer function after seating; press this button again to adjust dryer dials. Function will
stop automatically after about 4 minutes or can be turned off immediately by pressing the OFF button.
O – UV Sterilization
Press this button to enter UV sterilization function under unseated status. Icon will blink.
P – Water Pressure
Press this button to adjust water pressure dials when front wash or rear wash is activated.

Low-Voltage Warning

Note: Please charge immediately after voltage warning.
• When
Pairing
Note: Pairing process shall only be performed when unseated.
• Press remote top ON button to activate toilet when under normal powered on status.
• Hold remote dryer button, after bottom row of icons quick blinking, toilet operation starts.
•
Hold toilet
•
When the bottom row of icons on remote stop blinking, this indicates successful pairing.
Remote to Toilet Communication
• When remote moves outside of detection area, bottom row of icons on remote will auto flash (indicating searching toilet
signal). When moved back into toilet detection area, if toilet is powered on and under normal operation, signal will be
automatically reconnected, and icon will stop blinking after successful connection.

Stop Function

Whenever pressing and holding
•
Remote Setting Guide
B
G
H
I
J
1274372-A05-B June 2016
button blinks, this indicates remote internal battery will be exhausted, the remote requires charging.
button and button on toilet side panel, release button when heard one short beep.
C
cover 便盖 seat 座圈
massage 脉冲/移动
K
button, remote shall enter stop mode.
D E
spiral 旋转冲洗
L
M
7
F
N
O
P
Kohler Co.