Burner Removal; Log Burner Removal; Glass Burner Removal - Napoleon Ascent BHD4PN Installation And Operation Manual

12.4

burner removal

12.4.1 log burner removal

Remove the main door(s) from the appliance see "main door removal / installation" section for detailed
A.
removal instructions.
Carefully remove the charcoal embers, charcoal lumps, glowing embers and logs from the appliance.
B.
Remove all of the hearth pads, from the appliance. Refer to the "hearth pad installation / removal" section
C.
for instructions.
Remove the 4 screws securing the burner in place. Then slide the burner off the orifice and remove from
D.
the appliance.
To reinstall the burner, reverse these steps.
E.
note:
When reinstalling the burner, ensure that the venturi rest on the orifice.

12.4.2 glass burner removal

Remove the main door(s) from the appliance see "main door removal / installation" section for detailed
A.
removal instructions.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
B.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as shown
C.
below.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifice and
D.
remove from the appliance.
To reinstall the burner reverse these steps.
E.
note:
When reinstalling the burner, ensure that the venturi rest on the orifice.
C
D
D
maintenance
53
W415-1285 / G / 04.27.18
EN