Burner Removal; Log Burner Removal; Glass Burner Removal - Napoleon Ascent Multi-View Series Installation And Operation Manual

13.4

burner removal

13.4.1 log burner removal

A.
Remove the main door(s) from the appliance see "main door removal / installation" section.
B.
Carefully remove the charcoal embers, charcoal lumps, glowing embers and logs from the appliance.
C.
Remove all of the hearth pads, from the appliance. Refer to the "hearth pad installation / removal" section.
D.
Remove the 4 screws securing the burner in place. Then slide the burner off the orifi ce and remove from
the appliance.
E.
To reinstall the burner, reverse these steps.
note:
When reinstalling the burner, ensure that the venturi rest on the orifi ce.

13.4.2 glass burner removal

A.
Remove the main door(s) from the appliance see "main door removal / installation" section.
B.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
C.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as shown
below.
D.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifi ce and
remove from the appliance.
E.
To reinstall the burner reverse these steps.
note:
When reinstalling the burner, ensure that the venturi rest on the orifi ce.
D
C
maintenance
55
W415-1285 / J / 11.15.19
EN