Pch-Fw Configuration; Onboard Devices Configuration; Apm Configuration; Pci Subsystem Settings - Asus TUF Z390M-PRO GAMING WI-FI User Manual

3.6.6

PCH-FW Configuration

This item allows you to configure the firmware TPM.
3.6.7

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
Hyper M.2X16 [Enabled][Disabled]
[Disabled]
[Enabled]
The number of SSDs that can be detected varies with the configurations of the PCIe X16
slots.
HD Audio
This item allows you to use the Azalia High Definition Audio Controller.
Configuration options: [Disabled] [Enabled]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controllers.
Configuration options: [Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
3.6.8

APM Configuration

The items in this menu allow you to set system wake and sleep settings.
ErP Ready
This item allows you to switch off some power at S4+S5 or S5 to get the system ready for
ErP requirement. When set to [Enabled], all other PME options are switched off.
Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]
3.6.9

PCI Subsystem Settings

SR-IOV Support
This option enables or disables Single Root IO Virtualization Support if the system has
SRIOV capable PCIe devices.
Configuration options: [Disabled] [Enabled]
3-18
Only one SSD installed onto the Hyper M.2 X16 card can be detected.
Two or three SSDs installed onto the Hyper M.2 X16 card can be detected.
Chapter 3: BIOS Setup