Setting The Beeper; Gps Satellite Signal Acquisition; Home Screen; Customizing The Home Screen - Garmin GPSmap 585 Plus Owner's Manual

Setting the Beeper

You can set when the device makes sounds.
1 Select Settings > System > Beeper.
2 Select an option:
• To have the device beep when you select an item and when an alarm is
triggered, select On (Selections and Alarms).
• To have the device beep only when alarms are triggered, select Alarms
Only.

GPS Satellite Signal Acquisition

When you turn on the COMBO unit, the GPS receiver must collect satellite
data and establish the current location. When the fishfinder acquires satellite
signals, appears at the top of the Home screen. When the fishfinder
loses satellite signals, disappears and a flashing question mark appears
over on the screen.
For more information about GPS, go to www.garmin.com/aboutGPS.

Home Screen

The home screen provides access to all of the features in the device. The
features are dependant on the accessories you have connected to the device.
When viewing another screen, you can return to the home screen by holding
BACK. You can customize the layout of the screens and the items shown on
the home screen.
GPSMAP 585 Plus
®

Customizing the Home Screen

You can add items to and rearrange items on the Home screen.
1 From the Home screen, select Customize Home.
2 Select an option:
• To rearrange an item, select Rearrange, select the item to move, and
select the new location.
• To add an item to the Home screen, select Add, and select the new
item.
• To remove an item you have added to the Home screen, select
Remove, and select the item.
5