Connecting The Converter; Connecting To A Tv; Connecting To Cable - Radio Shack 15-1981 Owner's Manual

CONNECTING THE CONVERTER

CONNECTING TO A TV

Use the supplied 75-ohm coaxial ca-
ble with F-type connectors to connect
the 75-ohm terminal on your TV to the
terminal on the back of the
RF OUT
converter. If your TV has only 300-
ohm terminals, use a 75-to-300 ohm
transformer (not supplied), available
from your local RadioShack store.

CONNECTING TO CABLE

How you connect your converter de-
pends on the complexity of your video
system. Refer to the connection ex-
amples on the next few pages to find
the one that is most similar to your
system.
Notes:
• Your system might use a combina-
tion of two or more of the following
examples. If you have questions,
take a diagram of your system to
your local RadioShack store for
assistance.
• Check local regulations before
connecting any device to your
cable system.
Connect the cable company's coaxial
cable to the
RF IN
of the converter.
terminal on the back
7